Building your success in London
Building your success in London

AUTOMATED SCREEDS WITH ADMIXTURES

 

STEADY DOSAGE OF MATERIALS, GPS TRACKING, COMPUTERISED AND AUTOMATED PUMPING SYSTEM

When it comes to mechanical strength, screeds produced by COLIBRI' BUILDING SOLUTIONS LTD have passed all the relevant, strict testing nowadays needed in order to ensure a quality product. The addition of admixtures allows the screed to display structural and load-bearing characteristics far more performing than a traditional one.

 

A screed with admixtures presents multiple advantages

 

  •  Hard enough to be walked on after 24 hour

  •  Restrained shrinkage - max 0.4 mm/m

  •  Increased mechanical resistance

  •  Reduction of warping and chalking

  •  Reduction of air pore content (in compliance with BS EN 1264-4)

  •  Improved thermal transmittance

  •  No need for fibres and rebar mesh

  •  Protected against rehumidification

  •  The preheating phase can be started during the drying phase

FROM SMALL TO LARGE PROJECT RESTRUCTURING 

COLIBRI'- BS employs a system for producing its own screeds which is one of a kind and also highly advanced. The dosing system controls in an automated fashion each and every process by using a Programmable Logic Controller (PLC), which completely regulates the dosage of the needed materials, thus ensuring a steadily uniform, homogeneous final product.

 

All the components for the mix are always mixed on site while carrying out the operations, with no permanent occupation of public or site ground since the whole equipment circulates by road. Therefore, at the end of each day, nothing is left on site. This versatility allows for an easy collocation also on sidewalks and narrow places, thus resolving many logistics issues which may arise in refurbishment sites with little space or in the city centre.

Our vehicles are totally self-sufficient and only need to be connected to the water system on site. When fully loaded they can provide a production of about 250 m2 of screed for an average thickness of 60 mm, with no need to be refilled on site.

Our vehicles also are fully respectful of the environment, since they all employ Euro 5 and Euro 6 engines as well as systems devoid of toxic fumes and particles.

CONTACT US

Colibrì Building Solutions Ltd

C/O Central Working

6-8 Bonhill Street

LONDON

EC2A 4BX

Uniited Kingdom

 

info@colibri-bs.com

For any enquiries, questions or commendations, please call: 

 

+44 741 55 26 927 

 

or fill out the following form

CAREERS

 

Looking for an exciting job opportunity?

Find out more in our careers section.